Jump-Start a Machine With Battery Cables
There's never a fine date for a van's battery to die. However provided you garner a common purpose, you can jump-start the battery, and be on your course of action in no period. Ensue these directions carefully, as improper bag of battery cables can be malicious.
Instructions
1. Bargain a Companion automobile with a big battery. Build positive they're arranged so the front ends of both cars are either facing Everyone other, or condign alongside to Everyone other.
2. Regulate the hoods of both cars, and prop them up with their cornerstone arms.
3. Set the batteries on Everyone vehicle, and ascertain the useful and cynical battery terminals on both. These terminals should be clearly noted either with the subject "Positive" and "Negative" or with plus and minus symbols. Some batteries have rubber or plastic covers on the terminals, which will have to be removed.
4. Make sure the ignition on both cars are turned off.
5. Clip one of the red battery cable clamps to the positive terminal on the dead battery.
6. Clip the other red battery cable clamp to the positive terminal on the good battery.
This can be the engine block, or even the edge of the car's frame by the hood opening. Do not attach it to any part of the battery.9.
7. Clip the black battery cable clamp to the negative terminal on the good battery.8. Clip the remaining black battery cable clamp to any solid metal surface of the car.
Start the engine on the car with the good battery.
10. Start the engine on the car with the dead battery. If everything is connected properly, it should fire right up.
11. Disconnect the grounded black battery cable from the jump-started car, followed by the other black battery cable, then the red battery cable from the jumper car, and finally the secon red battery cable.
12. Replace battery terminal covers, and close both hoods.
