Automotive batteries bring electrical potential to an van. Loosen the battery terminal connector retaining bolt. Connect the battery terminal connector to the "Negative (-)" battery post on the second battery, and tighten the terminal connector retaining bolt.
Instructions
1. Intersect a length of wire, and strip Everyone stop of a ½ inch of insulation. Attach one neb of the wire to one of the battery terminal connectors, and solder the connexion. Attach the other limitation to another battery terminal connector, and solder that connexion.
2. Loosen the battery terminal retaining bolts on the battery terminal connectors attached to the wire. Community one of these connectors on the "Rejection (-)" post on the first battery. Place the other battery terminal connector on the "Positive (+)" post on the second battery. Tighten the battery terminal retaining bolts so the battery terminal connectors fit snugly on the battery posts.
3. Cut a second length of wire, and strip both ends of a ½ inch of insulation. Attach one of the ends to one of the remaining battery terminal connectors, and solder the connection. Loosen the terminal connector retaining bolt. Connect the battery terminal connector to the "Positive (+)" battery post on the first battery, and tighten the terminal connector retaining bolt.
4. Cut a third length of wire, and strip both ends of a ½ inch of insulation. Attach one of the wire ends to the last battery terminal, and solder the connection. On the contrary, these elementary, even dominant devices can be used to supply a dynamism source for other applications, such as a solar effectiveness grid, or as a backup authority source in the act of a energy outage.Some devices may demand exceeding voltage than a unmarried automotive battery can care, thus forming it basic to applicability two or else batteries to satisfy the voltage requirements. To maximize the voltage output of two or besides batteries, these batteries must be connected in a series order.
