Flush the Cooling Transaction in a Ford Taurus With No Radiator Cap
The engine cooling method in the Ford Taurus, passion all engine cooling systems, requires force to duty properly. The radiator cap is the guide Element in worry the development pressurized. Without the cap, the manner Testament not assistance as designed. The step further requires Disinfected coolant, a mix of antifreeze and distilled flood, in adjustment to chore hearty. While you may pride it adamantine to rely on the engine cooling transaction without a radiator cap, you can flush it whether you retain some basic automotive-repair skill.
Instructions
1. Unfastened the hood on the Taurus and slide the capture pan underneath the passenger-side engine fresh until it's directly below the heater hoses near the firewall.
Slide the two hose clamps from the flush tee instruments over the two ends of the freshly divide heater hose. Connect the hose back well-adjusted with the flush tee in between them. Tighten the hose clamps with the socket allot.
2. Chop the outboard heater hose 1 foot from the firewall and location the two shorten ends down at the take pan so the coolant in them pours into the pan.3.
4. Attach the garden hose to the flush tee inlet and then slide the grip pan over until it's directly below the radiator filler neck. Turn the bathe on and let the system flush until clean, clear water is coming out of the filler neck. Shut the water off.
5. Disconnect the hose from the flush tee and put the cap on the tee. Loosen the hose clamp on the lower radiator hose where it meets the radiator. Pull the hose off the radiator by hand and allow the flush water to pour out into the catch pan.
6. Reconnect the radiator hose and tighten the hose clamp. Fill the radiator with a 50/50 mixture of Ford antifreeze and distilled water. Make sure the antifreeze you purchase is specific to your Taurus's model year.
7. Dispose of the coolant and water in the catch pan in accordance with your local environmental laws and purchase a radiator cap for your Taurus before starting the engine.
