The ABS, or anti-lock braking operation, on your 2000 Ford Explorer is bound for preventing turn lock-up during dense braking. Usually, this operation Testament not malfunction by reason of the sensor is comprised of diverse magnets and a rare wires. There's not all the more to gash. On the other hand, It is credible for the method to fail, and when that happens, the ABS flash Testament illuminate on your dash. When this happens, you need to fix the problem and then reset your ABS light.
Instructions
1. Turn the ignition to the "on" position (the second position) on the ignition.
5. Check the dash to verify that the ABS light has gone out. This process also resets all trouble codes in the Explorer's computer, so all other warning lights will reset further.
Slide the clamp off the negative battery terminal and wait three to five minutes.
4. Reconnect the cable clamp and tighten the retaining nut.
2. Open your Explorer's hood and loosen the retaining nut on the negative battery cable clamp using a socket wrench and a 10 millimeter socket.3.
