A Mustang's parking brake is an substantial safety Element on the vehivle.
2. Remove the bolts inside the parking brake assembly, using a wrench. Allot the adjuster stone connected at the imitation of the brake cable rod.
Instructions
1. Field the van on a continuous surface and turn off its ignition. Direct and secure the motorcar's hood. Disconnect the opposite cable from the vehicle's battery, using a wrench. Enter the Chauffeur's side of the motorcar. Position yourself at the Mustang's centre console. Cover a flat-head screwdriver between the spaces of the parking brake embrace and remove it carefully. Pull up on the parking brake utilize to the fourth mark.
The Ford Mustang's braking transaction is an important safety Component. One of the machine's braking components is the parking brake, or help brake, which is located inside the vehivle. The parking brake is easily busy by pulling up the holder and it is oftentimes used when the vehicle is parked. Loosen the stone and cinch the cable rod remains attached. Push the parking brake's button and fully lower it.
3. Turn the adjuster nut with a wrench until it is completely tightened and located close to the parking brake handle. Ensure the cable rod is in its original position. Pull up and push down the parking brake handle four times to set the adjustments. Reinstall the brake assembly's bolts.
4. Apply lubricant to the assembly to maximize adjustment effects. Replace the parking handle cover. Reconnect the negative battery wire and close the hood. Start the engine and test the parking brake to ensure it engages and properly works.
