Your Plymouth Voyager has an electrically operated engine cooling fan. While the procedure to change the engine cooling fan in a Plymouth Voyager is slightly aggrandized complicated than in other vehicles and requires you to duty briefly under the vehicle, a novice can even accomplish these steps in under 2 hours.
Instructions
1. Unhook and isolate the detrimental battery cable on your Plymouth Voyager, then stand and safely support--using jack stands or ramps--your vehicle.
2. Remove the radiator Issue hose from its retaining clip and remove the retaining clip from the fan shroud (housing) unit. Provided your vehicle has an automatic transmission, you as well call for to remove the lower transmission oil cooler lines from their retaining clips on the fan shroud and the radiator.
3. Lower your vehicle, then remove the full air cleaner meeting and the air intake resonator. Unplug the cooling fan's electrical connectors and remove the coolant recovery development mounting screw from the upper radiator crossmember.
4. Disconnect the upper radiator mounts connecting it to the radiator crossmember, then remove the crossmember. Loosen and remove the mounting screws holding the cooling fan in accommodation. You may essential to up thrust and safely back the vehicle again to loosen and remove the lower mounting bolts.
7. Area the radiator Issue habitation in its elementary site and replace the retaining clip in the fan shroud. Reconnect the battery cable to your vehicle, then run the engine up to normal operating speed and check for coolant leaks and proper engine cooling fan operation.
6. Convert the coolant recovery operation mounting screw in the upper radiator crossmember, exchange the air cleaner meeting and air intake resonator, then plug the cooling fan's electrical connectors back in. Besides, reconnect the transmission oil cooler lines to the fan shroud and radiator.
5. Undo the upper cooling fan retaining clips and remove the all-inclusive cooling fan meeting from the vehicle. Berth the fashionable cooling fan meeting in the vehicle and interchange the retaining clips, then alter the upper and lower mounting screws. Alter the upper radiator crossmember and reconnect the radiator mounts attaching to it.
