Arc welding is a development of fusion used to blend two metals. Remove rust, grease, distemper and gray welds from your work piece with a wire brush and acetone before dawning a new weld. Brush, wipe and repeat until you have a clean surface to work with.3. Select the proper electrode for the job you're doing.
Allot up your arc-welding plan. To exhaustive the progression, and to create the bottom line arc, you'll want To possess an AC or DC welder as your potentiality source. Connect this source to the work piece by hang-up of the commission cable and to the insulated electrode cable, which provides electrical contact with the welding electrode.
2. Energetic heat from an electric arc formed between the commission and an electrode produces a pool of molten metal along the Seam. As the metal cools, it solidifies, fusing an immensely burly bond between the two pieces of metal.
Instructions
1.You can simply use an electrode to carry the electrical current between it and the work. Alternately, you can select one with an outer coating of flux, which helps to create the arc while providing a protective shield to prevent gas and slag from contaminating the weld. The flux-coated electrode provides a better bead, and therefore a stronger weld.
