Install an Exhaust Manifold Gasket
After the air/fuel assortment within a vehicle's engine ignites, the remaining gases are pushed absent of the engine and into an exhaust manifold. The stop of the manifold is to combine these gases and administer them to an exhaust channel. Between the engine block and the manifold is a gasket designed to prevent the gases from leaking gone of the engine before reaching the manifold. Authorize the engine to nippy completely to avoid burns from a blistering exhaust manifold.2. Unfasten and remove Everyone of the exhaust manifold's retaining bolts with an open-end wrench, then pull the manifold off the cylinder belief to expose the gasket.
Since of the highest temperatures this gasket is exposed to, exhaust manifold gaskets hope for replacement when a leak is discovered.
Instructions
1.3. Pull the exhaust manifold gasket off either the manifold or the cylinder mind, depending on which surface the gasket adhered to.
4. Coat the threaded plenty of Everyone of the exhaust manifold's bolts with anti-seize compound.
5. Position the manifold against the cylinder sense, then thread alone the bolt on Everyone side of the manifold into the cylinder sense. In other text, thread the bolt on the far left side of the manifold and the bolt on the far ethical side of the manifold. Achieve not thread the bolts all the system into the cylinder intellect.
6. Position the replacement manifold gasket above the manifold, between the manifold and the cylinder imagination, then lower the gasket onto the two bolts threaded into the cylinder attitude in Action 5. These two bolts Testament make sure that the gasket remains properly positioned when the manifold's bolts are tightened.
7. Tighten Everyone of the exhaust manifold's remaining retaining bolts in inadequate increments with the open-end wrench until all of the bolts are tight. Tightening the bolts in humble increments will ensure that the gasket does not distort and cause a leak.
