A leaking brake edge can end a grim risk to safety.
Attach the hose and tighten the fittings at the other end using the same technique.5. Add brake fluid to the reservoir in the engine compartment to replace what was lost. Replace the wheel on the car. The brake border hose is a effortless division to interchange and does not crave a mechanic provided you admit the tools and basic automotive scholarship.
Instructions
1. Lift the vehicle with the jack behind where the repair is needed. Prop the vehicle on the jack stands to cache it steady while you assignment.
2. Loosen the lug nuts on the tires and remove the trundle on the side where the brake path is leaking.
3. Spray lubricant on the fittings on the old brake line. Use the regular wrench to stabilize the fitting and hold it in place while using the line wrench to loosen the nut on the fitting and remove the end of the brake line. Repeat at the other end. Remove the brake line.
4. Place the new brake line at the bottom fitting and tighten into place using the double-wrench method used to remove the old line.Leaking brake lines are a funereal worry on a vehicle. Loss of brake fluid reduces strength on the brake lines and can grounds a decrease of stopping potential when you press the brake pedal and exertion to mark. The risk of accident and injury from a vehicle unable to break properly is austere and any brake line defects should be repaired promptly.
Test out the brakes to be sure the pressure has returned and the vehicle stops properly. It may be necessary to pump the brakes a few times when they are first used.
