Working tail lightstail lights are aloof as big-league as working headlights.
When the tail lights of your Ford animation deficient, it can concoct a mere damaging predicament. The tail lights feature to alert drivers of your intentions to cessation the vehicle. Allowing drivers from the rear to descry your vehicle at eventide age is again a leading overhaul of the tail lights. Not only is it dangerous, but it can be expensive too: police can pull you over and write you a ticket for driving like that. Finding the problem is a relatively easy thing to do; you just need to know what steps to take to get it right.
Instructions
1. Check the brake light fuse in the fuse block. You can access the bulbs by removing the tail light lenses using a ratchet and socket or a screwdriver. The filament should be unbroken; if it is broken, replace the bulb and recheck.3. Check the socket by removing the bulb.
The fuse block is typically located under the driver's side of the dashboard. Refer to your repair manual for exact fuse location.2. Examine the filament of the brake light bulbs and check that the bulbs are seated properly in the socket.
The bulb is removed by pressing it down and turning it by hand. Look for excessive corrosion inside the socket and replace it if needed.
4. Check the voltage coming out of the socket using a multimenter. If there is no voltage, you need to trace the wiring of the lights using the wiring schematic in the repair manual. You will be looking for any breakage in the wires or shorts.
