Sometimes you chalk up to repair a humble rust spot or a dent on your vehivle, boat or motorcycle. The kits are available from a conglomeration of manufacturers. You can manipulate the fiberglass repair instruments with a Broad change of materials, including metal, fiberglass and plastic.
Instructions
You can beget the repair using a fiberglass repair equipment. The apparatus contains a fiberglass mesh or pad, resin and an accelerator. You can acquire fiberglass repair kits at your regional hardware or Car parts store.
1. Sponge the repair area clean with a rag. The surface must be at liberty of debris.
2. Sand the surface of the damaged sphere with 80-grit sandpaper. Sponge the dust off with a rag.
3. Section a abundance of the fiberglass pad to the extent all-important to comprehend the damaged globe. This may have need indefinite pieces.
4. Country the resin and the accelerator in a can. Postdate the manufacturer's instructions for the resin-to-accelerator ratio. Stir the resin and accelerator with a stick until the compounds combine thoroughly.
5. Apply the resin to the damaged area with the included brush. Brush until you get an even coat.
6. Place the fiberglass pad in the resin. Push the pad into the resin until it is flat on the surface.
7. Continue to apply the resin and fiberglass pad until you achieve the desired contour. Allow the resin to dry according to the manufacturer's instructions.
8. Sand the fiberglass repair with 80-grit sandpaper to smooth out any rough edges. Wipe off any dust or debris with a rag.
9. Sand the surface again with 220-grit sandpaper to remove any small scratches. Wipe the area clean with a rag.
