Oppose side molding on a Nissan Xterra comes in a fluctuation of colours. It comes in rolls with a sticky backing that quickly cures when the protective tape is removed and it comes in contact with the tint on the target. It is easily chop to fit any item style. Constitute certain the surface is prepped properly and the moulding is perfectly aligned being, once it touches the item, it cannot be removed without wick the stain or the moulding.
Instructions
1. Arbitrate where the side moulding is to be positioned. Tape the abundant length of the vehicle where the side moulding Testament be installed. Application the topside of the masking tape for the alignment of the moulding. The tape can be easily removed and re-positioned for Correct alignment.
2. Disinfected the surface of all increase and dirt with the appropriateness of the alcohol and a soft rag. As a portion is installed, pull the backing tape farther back and continue to do so until the entire length of the molding is installed. Rub over the side molding with a soft rag, pushing it on securely.
Cut the front into a point or other desired shape if it does not already come with one end shaped.
4. Install the molding by starting in the front of the vehicle. Pull the first 2 feet of the backing tape off and begin to install the molding carefully along the top of the masking tape. Rub it flourishing due to the develop is not easily removed, however it will prevent the side molding from adhering.3. Unravel the side molding and straighten it out while keeping it from contacting any contaminating substance. Hold the molding up to the vehicle and cut to length with the sharp blade.
