Raised transition lines between colors can detract from a custom tint jobs inquire.
Although it may not in truth involve anything, a raised transition line between colors on a distinct tint assignment can ruin the overall appearance of a custom automobile or Motor lorry. These lines or ridges are created as a moment layer of tint gathers and dries at the column of a masked-off earth. When the masking tape is removed, the transition edge remains.
Instructions
2. Abode a sheet of 1000 grit sandpaper on a foam sanding pad. Saturate the sandpaper with clean water.
1. Disinfected the nature encircling the transition limit with denatured alcohol and a lift-free towel to remove any dirt or dust from the surface. Acquiesce the surface to air dry for at least ten minutes. Using gentle pressure, sand along the transition line while moving in a single direction. Stop occasionally To cleanse the sanded area with water applied from a spray bottle. Continue sanding until the transition line has subsided, progressing between 1500 and 2000 grit sandpaper to remove sanding marks.
3. Apply a small amount of buffing compound onto the sanded area. Buff the area lightly with an electric hand buffer to remove any remaining sanding marks and to restore the paint's luster.
