Whether the window glass in your Dodge Motor lorry's door is cracked or broken, it needs to be replaced. The glass itself is held in district within the door panel, so you occasion to remove the inner trim panel to arrive it. Exercise caution when removing damaged glass, no trouble how lenghty the damage.
Instructions
1. Bolt the glass in place, starting with the retaining nuts along the outside and then the channel bolts near the inner edge.7. Replace the weatherstripping and the watershield; you may need to apply fresh adhesive to the watershield for it to stick.
Disconnect the rejection battery cable from under the hood. Loosen the clamp for the nigrous cable and establish the cable aside so it can't come into contact with its terminal. This is a deluxe precaution, nevertheless peerless needed whether the Motor lorry has gift doors or windows.
3. Remove the door's inner trim panel. Remove the window Eccentric person by using a towel or a hooked object to disengage the clip, or pry off the competency console with a trim panel and unplug its connector. Remove the door grip by lifting it and removing its retaining screw. Remove the four retaining screws for the panel, lift the door off its clips and disconnect all electrical connectors.
4. Peel back the watershield from the door. Pry the weatherstripping elsewhere of the top of the door.
5. Remove the bolts securing the glass' front flight channel; these bolts are lasting to the door's inner wrinkle. Uplift the window so you can span the glass retaining nuts through the holes in the door and remove them. Tilt the window forward and remove it from the door.
6. Slide the new glass into the door through the top slot. Lower the window all the habit down. You may necessitate to division gone any parts of the glass that could hole off within the door. Applicability caution when doing this, and capitalization a pick-like effects.2.
Install the inner trim panel in reverse order of removal. Remember to reconnect the battery cable if disconnected.
