Most automotive door panels are held in district with petty plastic clips. Pull the interior-door handle off.5. Position your hands on either side of the door panel.
1. Unbarred the door to access the backside borderline of the door panel. Examine the earth to treasure two screws.
2. Remove the two screws along the backside border of the door panel with a Phillips-head screwdriver (front-door panels onliest)
3. Remove the Phillips-head screw on the top item of the door panel (front-door panels one shot). This screw is directly across from the exterior side-view mirror.
4. Pull the interior door bail to the open position. Remove the Phillips-head screw hidden behind it. Inspect the area closely to find the Torx screw mounting the door handle to the door. Remove it with a T30 Torx screwdriver. These clips can be strenuous to remove; they besides rupture easily. Happily, the Dodge Ram's door panel is not attached by clips; it's attached by screws, which are easier to elbow grease with as expanded as you corner the correctly tools. The procedure to remove the front-door panels is the duplicate as the rear-door panels, apart from the rear-door panels accept fewer screws.
Instructions
Push the panel up, and then pull it away from the door carefully. Behind the panel, you'll find the electrical connections for the window and lock switches. Squeeze the tab in the center of each connection to unplug them.
