The oil pump lubricates the engine by care the oil circulating. Without this lubrication, the engine on your Hyundai Sonata wouldn't lope. The pump normally is located in the oil pan. You can modify a pump without efficient avail.
Instructions
Remove Old Oil Pump
1. Impel your Hyundai Sonata up onto ramps or lifts. Brace the front wheels so they don't roll whether you handle a jack. Allot the emergency fracture so the machine doesn't roll.
2. Withdraw the oil from your engine and disconnect the contravening battery cable. Remove the closest in cast: trappings coerce belts, front include, timing cestuses, crankshaft timing sprocket, oil pan, oil pickup tube, impact relief valve, oil strength switch, oil filter adapter, oil pump, oil plug cap and the left cylinder block plug.
Insert New Oil Pump
4. Install your oil pump housing and the gears. Add the left and ethical balance shafts.3. End a 5/16 inch prying factor to dominion the shaft by putting it in the plug gap and remove the balance shaft bolt. Cut absent the left balance shaft retaining bolt, the front contingency meeting, the left and hold together balance shafts and the oil pump housing and gears.
Place in the front case assembly and tighten the bolts to 20 ft-lb.
5. Put in the left balance shaft retaining bolt and tighten it to 25 to 29 ft-lb. Insert the left cylinder block plug, tightening the plug to 14 to 20 ft-lb.
6. Assemble the following components in order: the oil pump plug cap, the oil filter adapter, the oil pressure switch, the pressure relief valve, the oil pickup tube, the oil pan, the crankshaft timing sprocket, the timing belt, the front cover and the accessory drive belts.
7. Reconnect the negative battery cable. Start your Hyundai Sonata engine and check for leaks. Drive your car off the lifts if you don't find any.
