When your lawnmower begins to dash Rugged, it might be compulsory To cleanse the carburettor. Find the two fuel lines connecting to the carburetor. Pull the fuel lines off the carburetor with a pair of pliers.4. Remove the hex bolt securing the carburetor to the side of the lawnmower engine with a socket wrench. The basic is to prevent fuel flow from the Hay-maker fuel cistern to the carburettor before removing the unit.
Instructions
1. Turn off the fuel servicing to the carburettor whether your Hay-maker uses a fuel shut-off. If you do not have a fuel shut-off, siphon the gas in the fuel tank to a gas can with a hand siphon.
2. Remove the screw securing the air cleaner assembly with a flat-head screwdriver if your air cleaner faces upward. Side mount air cleaners require removing the hex bolt with a socket wrench. Lift the entire air cleaner housing off the mower. Side-mount housings require removing the top half and unscrewing the hex bolt securing the bottom half to the side of the engine.
3. Over date, the carburettor develops a buildup of dirt and grime which affects the float darner very as the fuel flow to the engine. The culminating habit To cleanse the carburettor is to remove it from the Hay-maker. Removing the carburettor from a lawnmower is generally the equivalent among all the manufacturers.
Unhook the throttle linkage from the top of the carburetor and remove the carburetor from the mower. Make a note which hole the throttle linkage connected to on the throttle arm of the carburetor.
