Replacement automobile stereos discharge not necessarily fit properly in the interval vacated by the factory-issue stereo.
The 1999 Volkswagen (VW) Beetle is a narration of the different Beetle introduced in 1998. It is in the basic shape of the decrepit Beetle however differs dramatically thanks to it has the engine in the front, with the Baggage storage in the rear. Volkswagen issued a customary radio with the motorcar that has anti-theft devices and requires best tools to remove. Consumers wishing to alternate the stereo with an aftermarket one posses to assemble undeniable adaptations to construct it fit in the VW Beetle stereo housing.
Attach the other end of the wire harness to the aftermarket stereo.5. Attach the antenna adapter to the antenna cable of the VW Beetle. Attach the adapted cable to the antenna port on the aftermarket stereo.
Include the appropriate hook fundamental signal with an "R" on the right-hand side of the radio. Fully engage both accept hooks in the slots.
2. Bag your forefingers to pull the hire hooks In relation to your entity to remove the stereo from the Beetle's console. Disconnect the wiring from the unit to the motorcar.
3. Install the faceplate. Slide the faceplate into the interval vacated by the stereo. Click the hooks into the grip hook locks. This Testament compensate for the difference in shape between the VW Beetle stereo and a standard-size aftermarket stereo. Ensure that the connection wires are coming through the gap in the faceplate before clicking it in.
4. Attach the wire harness to the equivalent port on the colored wire harness that was connected to the old stereo.
Instructions
1. Subsume the capture hook leading blatant with an "L" in the slot on the left-hand side of the radio.All the connections are now ready.
6. Carefully slide the connected stereo into the gap in the faceplate until it sits comfortably in the faceplate housing, taking care to slide the connected wires protruding from the back of the unit in first.
