The starter on a 1996 Mazda 626 is mounted on the side of the engine block. This starter Engine is electric, and it uses the stored electricity from the battery to turn over the engine when the solution is levy in the ignition. Whether the starter motor fails, then the Mazda 626 Testament be unable to begin, leaving the van stuck wherever it is parked. Should this happen, your single recourse is to remove the starter from the engine, and enjoy it rebuilt or replaced.
Instructions
3. Unbolt the starter Engine with the 3/8-inch ratchet and socket. Crawl underneath the automobile and haul the starter off of the engine, lowering it down from the motor next to the exhaust system. Unbolt the intake manifold bracket on the starter motor with the 3/8-inch ratchet and socket.
2. Lift the front borderline of the Mazda 626 with a jack and district a jack stand on both sides of the chassis. Remove the connections on the alternator with an open-end wrench.
1. Remove the cynical battery terminal connexion with an open-end wrench then remove the definite battery terminal. Unbolt the advanced air duct and resonance Hospital ward from the Chauffeur's side of the engine bay with a 3/8-inch ratchet, margin and sockets.
