Adjust your Pontiac Bonneville underneath the vehicle using lone a no problem screwdriver. Remove the access hole plug on the backing plates from both rear brakes.3. Move the parking brake cable until a 1/8 inch drill bit inserts through the access hole by hand.
Years 1986 Through 1999
1. Pull up and Proceeds the parking brake 10 clicks on Pontiac Bonneville oldness 1986 on ice 1990. Shorten this character to six clicks for elderliness 1991 though 1999. Repeat the pulling up and releasing of the parking brake lever six times for all oldness.
2. Stand your vehivle using the jack and cooperate both rear wheels with the jack stands. Moulding the assimilation Homewards instead of enchanting the motorcar to the mechanic shop saves you date and cash. Adjust the parking brake when the van starts to roll when parked on an incline. Advantage these directions for senescence 1986 on ice 1999 or 2000 to 2005.
Instructions
4. Pull up on the parking brake until it makes one click. Try to rotate the wheels backwards and see if they have some tension. Move the wheels forward to test the fact that they should not move at all.
5. Release the parking brake completely and make sure the wheels are free to rotate. Reinstall the access hole plugs. Lower your car with the jack and remove the jack stands.
Years 2000 to 2005
6. Apply your cars service brake with 150 pounds of pressure and release.
7. Press in on your parking brake with 125 pounds of pressure and release. Repeat two times. Verify the parking brake light is activated after the parking brake is applied.
8. Raise your vehicle using the jack and jack stands. Adjust the parking brake cables that run underneath the center of your car, using your pliers.
9. Verify the wheels turn freely. Press in on the parking brake and verify the wheels are stopped. Lower your car by releasing the jack and removing the jack stands.
