The majority of bumper covers on vehicles nowadays are make-believe absent of plastic. Nevertheless, some vehicles much advantage rubber bumper covers. Rubber is heaver and added durable than plastic, on the other hand rubber bumpers can all the more suffer the twin type of damage as their plastic counterparts. Bumpers are person to nicks, scrapes, gouges, and dents from plan debris, other vehicles and the incidential shopping cart. Reviving or restoring a rubber bumper cover requires a plenty of elbow grease and young caring apprehension.
Instructions
1. Remove lights and emblems from the bumper.
2. Wash the bumper involve with an all-purpose cleaner. Spray on the cleaner and scrub off dirt, grime and debris with a scouring pad. Rinse the bumper with Disinfected baptize and then dry it with a lint-free towel.
3. Sand off the gloss with 80 grit sandpaper. This is the most demanding and time-consuming any of the restoration growth. Remove all the dust after the gloss has been sanded off and then wash the bumper with contemporary imbue.
4. Visually see the bumper for signs of damage. Flash for dents, scratches and gouges.
5. Heat up dents with a heat gun. Concentrate the heat on both the front and rear of the dent. Once the rubber is soft, push the dent gone until it is aligned with the bumper. Sand the repaired areas with 180 grit sandpaper. Continue sanding with finer grit sandpaper until the repaired areas are smooth to the touch. Brush off all the sanding dust and rinse the bumper with fresh water. Dry it with a lint-free towel.
Fill in nicks, gouges and scratches with flexible auto filler. Flexible auto filler is available at auto parts stores.
7. Protect your hands with gloves as the rubber Testament be fevered. Once the dent has been corrected, spray the sphere with cold water.6. The bumper is now ready to be primed and painted.
