You look them all the extent on websites cognate Craigslist, "Extreme trailer, even-handed needs lights and wiring." You require a trailer, on the contrary that division approximately lights and wiring has you concerned; you're not undeniable you could helve the employment.1. Remove any mature lights from the trailer. Mount the different lights supplied with the tools (using the included screws and nuts) in the brackets where the full of years taillights were.
Hardy, relax and force purchase that trailer and grab some tools. In no future you'll keep a acceptable hasty trailer with lights that you installed yourself and that effort.
Instructions
These lights dispose their ground connexion finished the mounting screws, so be definite to remove any rust where the fan Testament contact the glowing bracket.2. Seperate the white wire from the multicolored cable, leaving about 4 feet still connected. Run the remaining wires down the inside of the left side of the trailer frame. Secure in place with nylon wire ties.
3. Using a solderless butt connector, connect the brown wire in the cable to the brown wire of both taillights.
4. Connect the green wire in the cable to the red wire of the right taillight using a solderless butt connector.
5. Connect the yellow wire in the cable to the red wire of the left taillight using a solderless butt connector.
6. Cut the white wire off a few inches past where it is still joined to the other wires in the cable. Install a solderless ring terminal on the cut end, and attach the terminal to the trailer frame with a self-tapping screw. Remove the paint where the ring terminal touches the trailer frame.
7. Attach the trailer connector to the multicolored cable with solderless connectors. Connect the wires by color, matching them as you go.
8. Tape all connections securely with electrical tape to keep moisture out.
