Remove the Seat Armrest for a Silverado
The Chevrolet Silverado pickup Motor lorry comes principles with seat armrests for increased consolation on elongated drives. On the other hand, some drivers may boast the armrest difficult or in the means, production for a frustrating operate. With a dwarf interval and a basic locate of wrenches, you can remove the armrest from your Silverado, to administer you aggrandized space for your arms or between-the-seats goods.
Instructions
1. Deed the backrest of the Chauffeur's seat as forward as you can to assemble it easier to arrive the seat mounting bolts on the Chevrolet Silverado. There will be one of these bolts on each side behind the seat, and one on each side in front of the seat. Remove the bolts and pull the seat out of the car.
2. Lay the seat on the backrest, so that you can work on the bottom of it. Remove the two bolts near the front of the seat to loosen the seat from the frame. The seat can be removed by lifting it away from the backrest.
3. From the bottom of the backrest, reach inside near where the armrest connects to the backrest. There is a small clip on the inside that holds the armrest in place. Replacement clips are not readily available.
When squeezed, the clip will release from the backrest, allowing you to remove the armrest. It may take a few minutes to figure out remove the clip without being able to see it.4. Replace the bottom half of the seat in the frame and the two bolts that hold it in place. Lift the seat into the truck and attach it to the seat rails with the four bolts you removed. Save the clip you removed from the seat, in case you ever wish to reattach the armrest.
