The 2001 Honda Civic was the head year for the 7th engendering of the perennial favourite for Honda enthusiasts. This was extremely the age that sparked the "tuner" craze amongst those who like adding aftermarket performance Car parts to receive the most horsepower and exclusive attending gone of their import vehicles. Still with all of these performance parts on the marketplace, your 2001 Honda Civic is much naked to thermostat failure. A factor that costs sole a uncommon dollars could edge up costing you thousands in engine repair bills provided you don't replace it as soon as it goes evil.
The easiest form to fix it is to hint the upper radiator hose from the radiator to the site where it bolts onto the engine.2. Remove the radiator hose from the housing with pliers.
Instructions
1. Fix the aluminium t-stat housing. The housing holds the thermostat into the engine and acts as a connector for the upper radiator hose.The clamp that holds the hose has two tabs. Squeeze the tabs cool to loosen strength on the hose, then pull the hose off the housing.
3. Remove the two bolts that hold the t-stat housing onto the engine with a 13mm socket.
4. Lift the housing off the engine and remove the gasket and thermostat. The thermostat simply pulls out of the engine with your fingers.
5. Wipe the mating surfaces of the t-stat housing and the engine block free of any gasket debris. A shop towel usually works. Use a small scraper if the material sticks.
6. Place the new thermostat into the engine with the spring submerged into the radiator fluid. Place the gasket onto the engine block and secure everything into place with the bolts.
7. Slide the hose back onto the t-stat housing and secure the hose with the band clamp.
