The catalytic converter happens to be one of the most expensive parts of a vehivle to locate, which leads many cats to best shot to repair it Homewards. You hold to appreciate your road on all sides of cars and exhaust systems, or you're honestly improved off enchanting it to a mechanic. Whether you're comfortable working on it yourself, there are a hardly any matters you should control in apperception.
Instructions
1. Lift your machine. Unfortunately, the catalytic converter sits approximately halfway down the length of your van, so lifting one confine or the other Testament not cause. Ramps are your best kind wager to receive you within span of the parts when working from habitation. Luckily, this is normally the hardest part of this repair.
2. Be patient with the bolts, as they are often hard to remove due to size and awkward placement. You may have to drill or saw bolts to remove them. With this in mind, you should pick up new bolts, nuts and seals for your replacement project.
3. Buy a catalytic converter specific to your car to avoid extra work.6. Reattach the exhaust pipes and 02 sensor, and the basic job is done. Make sure you replace any cracked or rusty pipes while you have the exhaust system apart.
Depending on your exhaust system, you may have to remove more pipes before you unbolt the converter from the muffler.
5. Replace the old catalytic converter with a new one. This should be the easy part, as you simply bolt the new part in place.
A generic part must be welded into the car, while a vehicle-specific model comes pre-welded to the proper pipes for easy bolt-on installation.4. Remove the 02 sensor (with an O2 wrench) before unbolting the catalytic converter. Then, you should remove the pipe connecting the sensor to the converter.
