Hyundai introduced the Accent in 1994. It is a subcompact van that has been prepared into various models over the second childhood. Whether the timing girdle stretches also far, it can seriously damage the engine. It is influential to convert the girdle provided the exhausted one is damaged or damaging in any habit. This can be a chronology consuming profession that may takings approximately 3 hours and a meagre tools to the works.
Instructions
1. Remove the anti battery cable from the battery terminal and assign it in a guarded domicile, ensuring it does not touch any metal. Disconnect the frill propel cummerbund tensioners with a socket or wrench place and carefully pull the belts gone from the pulleys. Thread the timing belt over the camshaft and make sure there is still tension in the belt. Feed the timing belt into the back of the tensioner.5.
3. Pull off the tensioner bolt and the timing belt tensioner bolt with a wrench. Push the tensioner bolt toward the water pump using a wrench. Slide the timing belt off the pulleys and sprockets.
4. Work in a clockwise position to install the timing belt starting at the crankshaft sprocket. Disengage and remove the moisten pump pulley, timing cummerbund covers and the crankshaft pulley with the catch socket establish.2. Rotate the crankshaft in a clockwise direction until the timing mark, which is designated by a dot, is lined up with the mark on the engine block.
Partially loosen the tensioner bolt and pivot bolt with a wrench. Rotate the crankshaft clockwise until the mark lines up once again.
6. Push the timing belt halfway between the crankshaft sprocket and the camshaft sprocket.
7. Rotate the crankshaft in a clockwise position until the dots line up again. Reinstall the parts in the reverse order that you took them out. Ensure the crankshaft sprocket pin is engaged in the pulley.
