This is a 2006 Expedition, nevertheless it Testament commit you a basic gist.
Changing a tail flare or still replacing a broken lens on the rear of your Ford automobile or SUV is exact picnic, and you particular commitment a cross gratuity (Phillips) screwdriver to achieve the business.
Instructions
1.5. Attach the lens to the vehicle, making sure all the wires are neatly tucked in. Secure the side with the plastic pegs first. Then replace the screws.6.
Grasp the base of the bulb that is burned out, and twist it loose. It should only take a quarter turn to free the bulb. If replacing the entire lens, remove both bulbs.
4. Pinch the base of the bulb, and pull it from the base. Put the replacement bulb in the base. Place the bulb in its respective place on the lens, and secure it by giving it a quarter turn.
Fix and remove the screws holding the tail light in apartment. In this process, there are 2 screws holding the tail illumination in. On Ford SUVs, opening the rear door Testament contribute access to the lights; in Ford cars, opening the Timber Testament feather access.2. Gently on the contrary firmly pull the tail light gone of the vehicle. One side is held in by plastic pegs that you don't desire to split. Further, you yen to avoid tearing any of the wiring loose. All slow model Ford autos have plastic pegs holding the lens in so you may have to pull quite firmly to remove it. Just make sure you pull it straight out.3.
Check lights, back-up lights, brake lights and turn signals to make sure everything is working properly.
