Drill Absent a Bolt
Enthusiasm for getting a bolt tight Sufficiently and an unforgiving world conspire to causation bolts to discontinuity off at the most inopportune times. Whether you are fortunate Sufficiently To possess some of the bolt above the surface, vice grips Testament regularly solve the puzzle. Whether it breaks flush, it is hour to rupture elsewhere the power tools.
Instructions
2. Chuck the drill into the drill motor and carefully center the tip of the bit in the impression left by the center punch. Drill slowly, keeping the drill parallel to the shaft of the bolt. You do not want to wander and damage the surrounding threads.
1. Use the center punch and hammer to make an impression as close to the center of the bolt as possible. This will allow your drill to bite without wandering. Drill at least 2/3 of the length of the bolt.
3. Insert the screw extractor in the hole you have just drilled. Some types require that you tap them with a hammer. Using a wrench, turn the extractor counterclockwise to remove the bolt.
