Antifreeze is a crucial object of any combustion engine's cooling evolution. Antifreeze protects the engine block, hoses and other components from damage in Very cold weather and keeps the engine from overheating in fiery weather or under ultimate driving conditions. Antifreeze can split down over continuance and fail to protect your engine as it should. This can intention expressive engine damage. You can exchange the antifreeze in a 2006 Hyundai Sonata yourself in approximately a day or so.
Place the trundle chocks carry on Everyone rear turn to direct the automobile from rolling off the ramps.3. Remove the con battery cable from the battery to make sure the radiator fan Testament not automatically come on while you are working.
Slowly coerce the vehivle up on the ramps and locate the emergency brake. Turn the machine off and pop the hood. Then acquire absent and dash off positive the van is securely on the ramps.
2.
Instructions
1. Accommodation the ramps in front of the vehivle so that you can coerce the automobile straight up on the ramps.4. Let the engine completely chilling down, then slowly remove the radiator cap and locate it to the side. Removing the radiator cap Testament remit the antifreeze to empty absent of the radiator faster.
5. Slide under the front passenger side of the engine bay and open removing the plastic radiator shield. You can manipulate a ratchet and a 10mm socket to remove most of the fasteners. Operate a Phillips screwdriver to remove the extreme fastener from the shield. Locate the plastic shield aside.
6. Allot the radiator withdraw plug on the lower left-hand side of the radiator. The radiator plug is a achromic plug with a turn handle on it. Loosen the white radiator plug with a pair of pliers by turning the plug counterclockwise.
7. Put a catch pan underneath the radiator drain plug and finish removing the plug. Let the antifreeze drain into the pan until the radiator is empty.
8. Replace the plug in the bottom of the radiator and tighten it securely.
9. Drain the antifreeze from the plastic antifreeze overflow reservoir that is mounted on the left hand side of the top of the engine bay. Remove the three fasteners that are holding the reservoir onto the frame, using a ratchet and a 10mm socket.
10. Remove the plastic reservoir from the frame of the car and pour the antifreeze into the catch pan. Reinstall the reservoir back on the side of the frame.
11. Back the car off of the ramps so that the car is back on a level surface.
12. Fill the radiator with antifreeze. Put the negative battery cable back on the battery and tighten. Drive the car long enough that the engine becomes hot enough to open the thermostat, then fill the radiator again while the thermostat is open to ensure it is completely filled.
