Avoid a fix-it ticket or a Journey to the auto-repair shop by doing this not difficult repair yourself. It is usually no deeper effortful than changing a lightbulb Homewards.
Instructions
1. Test the bulb (turn on the device) before replacing the light cover.9. Replace the light cover and tighten the screws.
On some cars, you may need a socket and ratchet.
3. If the bulb is accessed from inside the trunk or under the hood, there will probably be a plastic protective cover. Twist the knob or tab on the cover to loosen it.
4. Remove the burned-out bulb by pushing it in and turning counterclockwise.
5. Take the bulb to an auto-parts store to receive the right replacement.
6. Clean the inside of the bulb socket if it is dirty with a wire brush, or a small piece of sandpaper, and a rag.
7. Screw in the new bulb by pushing it in and turning clockwise.
8. Figure if you access the bulb from the absent (by removing the plastic flare contain) or from inside the Timber or under the hood.2. Whether the bulb is accessed from the away, remove the screws that secure the flare insert. Normally this Testament particular require a Phillips screwdriver.
