Whether the bar that secures your Dodge Motor lorry's tailgate is not working, this can be added that a light inconvenience. Someone can be injured while trying to ajar it. Whether the bar is stuck free, the gate may suffer damage from banging encompassing. Modify the lock as soon as likely. It's a relatively child's play case compared with other motorcar repairs.
Instructions
1. Extensive and lower the tailgate, unless the broken lock already keeps it govern. The access comprehend instantly faces upward. Catch off the access cover by removing its retaining screws--two on Everyone side string and five to six added in between.4. Install the new latch in the tailgate and connect it to the handle with the control rods. Reconnect the retaining screws, followed by the plastic bed liner (if the truck has one) and the access cover to the tailgate. Raise the tailgate and make sure the new latch functions properly.
If you're facing the tailgate from the rear, the latch is on the right side. The fasteners should require a hex wrench, and you may need to loosen them with an impact driver.
3. Disconnect the control rods linking the latch to the tailgate handle. The rods are accessible through one of the holes in the tailgate between the handle and the latch. You need only disconnect the rods from the latch's end, by pressing the quick-connect fitting tabs. Remove the latch from inside the tailgate.
Whether the Motor lorry has a plastic bed liner, it is also secured by these retaining screws.2. Remove the retainers for the latch.
