Remove a Starter From a 1998 Toyota Corolla
4. Depress the locking tab on the push-in connector located on the back of the starter solenoid, then separate the connectors. Locate the large, single wire running to the solenoid and remove the retaining nut that secures it with a socket and ratchet. Slide the wire off the terminal and lay it aside.
Instructions
1. Agape the hood of your Toyota Corolla and allot the colorless battery cable on the battery. Remove the retaining bolt from the adverse battery cable point with a wrench, then remove the cable from the battery and isolate it from the terminals.
2. Uplift the front of your Corolla off the ground with a jack and back the machine on a locate of jack stands. Once the automobile is secured on the stands, pull the jack elsewhere so you are not trying to occupation sorrounding it.
3. Fix the mounting bolts on the prerrogative side engine undercover. Remove the mounting bolts using a socket and ratchet, then lower the engine undercover to the ground and slide it out from under the car. Locate the starter from under the front of the car.
The 1998 Toyota Corolla starter Engine is located on the front, lower quota of the engine. Accessible from under the front of the machine, the starter mounts to the transmission ring housing. The Corolla has a engine undercover below the engine compartment that helps protect the starter and other components on account of sphere on the contrary it must be removed before you can remove the starter.
5. Remove the lower mounting bolt near the nose of the starter with a socket and ratchet. Support the body of the starter by hand and remove the upper bolt using your socket and ratchet. Slide the starter away from the bell housing, then lower it out of the engine compartment.
