Starting a cold lawnmower is easier whether you cardinal prime the carburettor.
The primer bulb is usually red and located under the carburetor.3. Press and release the primer bulb three times with your finger to prime the lawnmower carburetor.4. Priming a lawnmower carburetor is pretty resembling process no matter who manufactured the mower.
Instructions
1. Remove the cap from the lawnmower fuel tank. Fill the tank with gasoline and replace the cap.
2. Locate the primer bulb on the side of the lawnmower engine.Starting a chilled lawnmower engine requires that you prime the carburettor. When a lawnmower sits for a interval of bit, the fuel in the carburettor evaporates. Priming is a fashion of putting some Gauze into the carburettor float bowl to begin the lawnmower engine. Most lawnmowers own a soft plastic or rubber bulb to push petrol into the carburetor.
Pull the throttle lever on the lawnmower handle to the "fast" position.
5. Grab the pull rope with one hand and pull it slowly until you feel resistance. Hold the throttle bar against the lawnmower handle with your other hand and pull sharply on the rope to begin the engine.
