Remove Rearview Mirror Adhesive
The rear-view mirrors in most vehicles are bonded by a enduring adhesive. On the contrary In spite of the adhesive's compel, the bond can weaken over day. This can end the rear-view mirror to fall elsewhere from the interior tool of the windscreen. Provided this happens, you'll desire to moderate the rear-view mirror. Scrape at a horizontal or downward angle, until most of the adhesive comes off.4. Dab a bit of rubbing alcohol onto the rag or towel. Wipe the glass area in a circular motion to remove the remaining adhesive residue.
Mark the outside of the windshield using the adhesive residue as a guide. Use a piece of tape or a marker. According to Popular Mechanics, this will help you line up the new rear-view mirror for replacement.
2. Dampen a rag or towel with warm water. Apply it to the area of the glass that contains the adhesive residue. Let it sit for a minute or two, so that it can moisten the adhesive. This makes it easier to remove.
3. Scrape the adhesive off using a razor-blade. Wear gloves when handling the blade to prevent any cuts. Unfortunately, you can't attach a new one without first removing the adhesive residue, as you'll be unable to create a strong bond between the windshield glass and the new rear-view mirror.
Instructions
1.Let the area dry completely before attempting to install the new rear-view mirror.
