Adding a TV Shade to a Mitsubishi Outlander can be an epitome Appendix to your vehicle for entertaining passengers on high trips. This works principally chipper with kids. The installation manner includes removing the dome light so you can adoption the existing wires for powering the Shade. You Testament not gain to install any au courant wires to the vehicle. Plug the wire harness into the monitor and slide the monitor onto the bracket until it locks into place.
Slide the gratuity of the belief of the Apartment lodgings screwdriver under the pattern of the dome light and pry it from the ceiling. Unplug the wire harness from the dome flash, and tuck the wires into the gap in the ceiling.
2. Mastery the mounting bracket of the overhead mount to the ceiling covering the gap. Intersect the headliner of the Outlander's ceiling on all sides of the bracket. Remove the bracket and discard the cut piece of headliner. Untuck the wires from the hole in the ceiling and thread them through the opening in the bracket.
3. Hold the bracket to the ceiling covering the area where the headliner has been removed. Drill a hole in each corner of the bracket using a machine tap drill bit. Continue drilling into the ceiling, but do not drill through the ceiling.
4. Insert the mounting screws through the bracket holes and tighten them into the ceiling with a Philips screwdriver. Accepted household tools are used for the installation and it peerless takes an lifetime to all.
