Wednesday, March 4, 2015

Repair A Rusted Car windows Frame

Repair a Rusted Windscreen Frame


A rusted windscreen frame is bad being the uprightness of the frame is compromised by the rust important to corrosion and structural damage. The sooner you deal with a rust dispute, the easier the work Testament be. Rust develops gradually, and, the exceeding severe the rust, the besides crucial the doubt. The chief Migraine in dealing with a rusted windscreen frame is the windscreen itself. To thoroughly remove all the rust on a windscreen frame, it is crucial to remove the rubber seal and the windscreen.


Instructions


1. Pry the rubber seal loose with a pry item, and pull it free ride from the windscreen. Reduce the urethane seal sorrounding the perimeter of the windshield with a utility knife. Push the windshield out of the frame, and store it in a safe place.2. Conclude provided you longing to remove the windscreen yourself or admit it professionally removed. Removing it yourself is expanded cost-effective, however it is a Dainty procedure. Removing the windscreen is an important course in dealing with the rust on all sides of the window frame. Remove the windscreen wiper arms.


Clean the windshield frame with detergent and warm water.


3. Scrape the loose rust off the frame with a wire brush. Sand the rusted areas on the frame with an oscillating sander. Use 60 to 80-grit sandpaper for heavily rusted areas and 120 grit for less severe rust spots. Continue sanding, until the bare metal is exposed.


4. Wipe the frame with a clean cloth and denatured alcohol to remove all traces of grease and other contaminants.


5. Repair minor holes and damaged areas with Bondo. Apply the Bondo with a putty knife, and allow it to dry and harden for 45 minutes. Sand the repaired area with 120-grit sandpaper, until it is smooth and even.


6. Apply several light coats of automotive self-etching primer to the frame. Hold the nozzle eight inches above the frame as you spray the primer. Allow drying time in between coats.


7. Apply several light coats of rust-inhibiting automotive paint to the windshield frame. Rust inhibiting paint is available at local auto parts stores.


8. Replace the windshield and rubber gasket on the window frame.