Generic engine coolant can be used on a Silverado.
Flushing the coolant on a 2006 Chevy Silverado is an Unceremoniously burden and does not have need even specialist skill to achieve. It is a commendable impression to perform the function approximately once a year To cleanse absent solid residue deposits from corrosion, antifreeze and engine coolants bound to clog the cooling step. No expensive tools are elementary to flush the coolant, thanks to the 2006 Chevy Silverado has a petcock to filter the radiator.
Instructions
Lay a bucket or any other receptacle underneath the withdraw gap of the petcock so you can catch the used radiator fluid. Generate definite you determine not spill any used fluid on the ground, as engine coolants and antifreezes are immoderately alluring for animals due to their candy taste. On the other hand, those substances are toxic and can kill pets.3. Turn the petcock counterclockwise until the valve opens and the used radiator fluid drains into your bucket. Shut petcock after the draining process has finished.4.
1. Allot the petcock underneath the radiator on your 2006 Chevy Silverado. It is on the left side provided you Stare at the motorcar from the front.2.
Remove radiator cap and refill with engine coolant and water, using the funnel. In most climate zones, a 50/50 mix of coolant and water will be sufficient. Only extreme desert heat or arctic cold requires a mix of more engine coolant than water, but you should always be safe with a ratio of 75 percent coolant and 25 percent water, no matter where you live.
5. Tighten radiator cap and wipe off coolant that may have spilled on your engine, the radiator or the ground, using a rag.
6. Take the used radiator fluid to a hazardous waste collection site. Do not flush it into the sewer or toilet, as it is extremely toxic and dangerous to wildlife.
