A fuel filter is a mild and inexpensive bit of your vehivle's engine. It's used to prevent dust, dirt and other particles from contaminating your vehicle's carburettor or fuel injection process. Without a Disinfected and functioning fuel filter, your engine can training a departure of useable difficulties. Thankfully, it's relatively elementary to alternate geriatric fuel contour filters to detain your machine running as smoothly as potential.
Instructions
1. Depart your automobile's engine by turning the solution.
2. Fix the fuse devolving on for controlling the fuel pump. Whether your van doesn't hold a fuel pump fuse, you'll devoir to fix the relay culpable for controlling the fuel pump.
3. Remove the fuse or relay amenable for your automobile's fuel pump. Pop your car's hood and secure it in place. Affix a light to the hood if you're having trouble seeing inside.5.
The motorcar's engine should cutoff running. This will help to release any pressure that has collected within your fuel lines.4.
Remove the "banjo fitting" from your old fuel pump with a wrench. This is a unique bolt that connects the filter to the fuel lines. Depending on your vehicle's specifics, you may need to remove two banjo fittings.
6. Remove the clamp that holds your old fuel filter in place. The method through which your fuel filter is held in place may differ between car makes and models, so you should consult your owner's manual to find out how yours is installed.
7. Remove the metal washer from your old filter's banjo fitting. Replace the old washers with new ones.
8. Install your new fuel line filter. Secure the banjo fittings and replace the clamp to hold your new fuel filter in place.
