Building a Febrile Rod? Fix it off with flames and Fright other cars outside. Using a light inside the tail pipe make sure your plug fingers are open toward the back of your vehicle.9. Attach a spark-plug cord to each plug and at the opposite end of each cord attach a red wire. If you have multiple wires you will need a collection box to make them all into one big one.
This can exclusive be done to colossal block (V8)engines. You can't cook this to 4 cylinder engines unless it has nitrous oxide, these NOS systems are illicit; provided you admit a NOS development and you add the flame conclusion you Testament fabricate colourful flames.
2. Hoist and ease your vehicle using the Correct jack stands.
3. Incision outside your muffler and catalytic converter provided you corner them and install a straight exhaust channel were it's needed.
4. Grind an sphere on your exhaust before the headers to bright rust for a Disinfected surface and drill a slender gap in the slender world you cleared. Embrace a inadequate screw with a plenty of nigrous wire and attach the other extreme to your chassis using the identical form.
5. Repeat method 4 half habit down your exhaust toward the tail conduit.
6. Grind all environing the pipe 8 inches from your exhaust tip(s). Mark tubing in half for measuring. On both halves of your exhaust mark a circle almost the same size of your spark plugs. Drill these holes out using the proper bit.
7. If You drilled your holes correctly you now should be able to screw in both of your plugs with out a leak or slippage.
8. This is felonious in some places.
Instructions
1.10. Trail a long red wire from your collection box into your cabin and connect it to the (-) portion of your switch.
11. Install your switch somewhere in your vehicle that makes you comfortable.
12. Connect a second long red wire to the (+) portion of your switch and lead it to your fuse box and plug it into the (batt 1) spot, or if you want to make it easier you can plug this wire straight to your positive terminal on your battery.
13. That's all it is to it. With the proper ground and proper power source this system will shoot flames. The spark plugs ignite the carbons in your engines waste which causes flames.
