The starter on a Chevrolet engine is a little electric Engine bolted to the engine block near where the engine meets the transmission. When you turn the ignition switch to begin," the starter Engine spins the flywheel (album transmission) or flexplate (automatic transmission) that is connected to the engine's crankshaft. Rotating the crankshaft forces the pistons to modification up and down within their bores. Then, once the Glimmer plugs heat, the engine Testament launch to dash.
Instructions
Removing a Chevy Starter
1. Disconnect the ground cable from the opposite battery terminal.
2. Up thrust the vehicle according to instructions listed in the owner's album, and block it with jack stands placed underneath the frame.
3. Fix the starter Engine. On a Chevrolet engine, the starter Testament be alongside the engine near where the engine meets the transmission.
4. Tab and disconnect the electrical leads that connect the starter solenoid.
Lift the starter motor into position. Reinstall the bolts that connect the starter to the engine block.8.
Detach the starter from the vehicle.
Installing a Chevy Starter
7.5. Remove the bolts that connect the starter to the engine block.6.
Reconnect the electrical leads to the starter solenoid. Be sure to follow the labels you made during removal.
9. Lower the vehicle.
