Adding a spoiler to your vehicle is a relatively intelligible plan to customize it. Whether you admit basic mechanical skills, you can install it yourself. There are many designs and shapes to spoilers. Be undeniable to receive one that fits the Timber of your van.
Instructions
1. Degree the length and Breadth of the Timber lid. Select into affliction the brace constitution on the underside of the lid to maintenance you actuate where to install the spoiler.
Carefully tighten all the bolts that control the spoiler to the brackets.4. Mark the holes on the outside of the trunk where you intend to install the spoiler. Make sure you have the spoiler pointing in the right direction. Catch your measurements with you to make sure the spoiler does really fit where you intend to install it.
3. Place the spoiler wing brackets well-adjusted.2. Get the spoiler. Be trustworthy to receive one unreal for your automobile.
5. Drill holes through the top sheet metal of the trunk and the metal underside. Start with a smaller hole than necessary. Progressive drill larger holes until you have a large enough hole for the bolts to pass through. Vacuum the scraps from the trunk when you finish this step.
6. Smooth the insides of the holes with a hand tool equipped with a small sander. Paint the inside of the holes with touch-up paint to keep rust from forming.
7. Attach the spoiler to the trunk with the help of a friend. Be sure to put the washers in place before your tighten the bolts. The spoiler should not be loose. Make sure all the bolts have equal pressure on them.
