Control your propel looking close by removing bitty dents.
A can of compressed air, which is Frequently used To cleanse personal computer keyboards, should be available at your regional work overhaul store.
Instructions
1. Cleanse the surface of the dent.Unsightly dents and dings on your van detract from the appearance and rate of the vehicle. Repairing still the smallest dents can be expensive. Provided your van has a small dent it can easily be removed with a infrequent habitation supplies and a can of compressed air.Pour some vehivle cleaner into a bucket of inundate. Part your sponge, dip it into the concept and scrub the dent. Dry the surface with a Disinfected towel. Situate the vehicle brisk to an electrical Issue. End an industrial extension cord if need be.
2. Connect the hair dryer to the electric outlet and adjust it to its hottest settings. Place a can of compressed air near you, for easy reach. Put on your rubber gloves.
3. Direct the hair dryer to the center of the small dent, moving the hair dryer's nozzle in small circles. Place the hair dryer as close as possible without touching the car. Heat the dent for 1 to 2 minutes.
4. Turn off the hair dryer after the alloted time and place it in a safe location. Turn the compressed can of air upside down so that the bottom is facing up. Spray the can of air into the dent for 10 seconds.
5. Wait for the icy particles on the dent to melt off. Wipe away the moisture with your rag and inspect the area.
