Replacing the radiator in your Dodge 1500 pickup is a afafir that you can adequate in approximately 2 or 3 hours, saving you lifetime and way. Being of the highest temperatures of the fluid running over the radiator, it can occasionally prosper cracks or obtain clogged up and demand that the vehicle be replaced. The Dodge 1500 receptacle is attached with conscientious a infrequent parts, creation it easier to moderate when needed.
Instructions
Remove the Radiator
1. Unfasten the anti battery cable of the Dodge 1500 from the battery assign with an open-end wrench to avoid electric shock while replacing the radiator. Place a withdraw pan on the ground, underneath the filter valve on the passenger side of the radiator.
2. Part the cap off the radiator, and detach the rubber coolant overflow hose from the top of the radiator. Remove the cap from the coolant overflow reservoir on the passenger side of the engine compartment.
3. Ajar the withdraw valve at the backside of the radiator with a duo of pliers, and let the radiator filter completely. Unfasten the screw clamps on the radiator hoses at the top and backside of the radiator with a screwdriver.
4. Pull the hoses off the metal radiator flanges, and let any excess fluid filter into the pan. Remove the cooling fan shroud from the radiator with a screwdriver, and deed the fan shroud back outside from the radiator.
5. Detach the radiator mounting bolts from the vehicle frame at the top of the radiator vehicle with a socket wrench. Lift the radiator absent of the Dodge engine compartment, and place it absent of the form.
Replace the Radiator
6. Locate the cutting edge radiator inside the engine compartment, carry on the front grill, and secure the container with bolts to the vehicle frame. Connect the cooling fan shroud to the back of the radiator with a screwdriver.
7. Attach the rubber coolant overflow hose to the top of the radiator, put the cap back on the coolant overflow reservoir.9. Fasten the negative battery cable of the Dodge 1500 to the battery with the open-end wrench. Dispose of the drained coolant at your local recycling center or automotive supply center.
Attach the top and backside radiator hoses to the radiator flanges, and tighten the screw clamps with a screwdriver. Verify that the drain valve on the backside of the radiator is closed.8. Fill the radiator with a mixture of half coolant and half water, and place the cap back on the top of the radiator.
