Removing the vinyl include from an doddering Cadilac is a time-intensive project, on the other hand the Emigration procedure itself is easy. Removing a vinyl roof Testament aid elevate the appearance of a vehicle, and can besides cause the Cadilac eyeful latest and classy. With the equitable tools, this chore should receipts approximately one interval to plenary.
Instructions
1. Decrease gone the windscreen and the back glass. Employment a assistance dagger to chop ended the rubber holding the glass in deposit. Remove any metal pieces and clips holding the glass in accommodation. Release the gutters and moldings around the windows with a chisel or putty knife. Simply pry the pieces away from the frame of the car. Set the pieces aside to reinstall later if they are in good condition.
3. Employ a chisel and hammer to pull the tacks holding the vinyl roof away from the car frame. Pull the tacks out with pliers. Throw the tacks away, as they will likely be quite rusty. You may have to twist them a little to separate them from the vinyl and frame.
4. Remove the trim pieces holding the vinyl top in place. Most of the trim pieces should either screw or clip onto the frame, which you can either unclip or unscrew to release. If the screws are rusted into the frame, you can drill the screws out to release the bond.
5. Keep someone push the glass away from the inside, and accept it as it comes away. Allot the glass and supports aside so that you can modify them when finished.2. Disinfected gone any remaining rubber or adhesive with a putty bait chopper.
6. Put on a dust mask. Pull the vinyl cover off of the car. If the adhesive is still sticky, you may have to use a putty knife to help break the bond between the vinyl and the top of the car. You can also heat the adhesive with a heat gun to loosen it enough to remove the vinyl. Discard the old vinyl roof cover.
7. Sand away the remains of any padding under the vinyl roof. Sand the roof of the car until the bare metal is exposed. Wipe any remaining glue residue with an adhesive remover and a soft cloth.
