The Hummer is manufactured by Common Motors. Assign the transmission jack directly in the centre, under the transmission. Lift up on the transmission approximately 2 inches. Let compel off the transmission, and it Testament rise another inch.4. Save hundreds by performing the labour yourself and remove your own Hummer's transmission.
Instructions
1. Lift the front and rear of the Hummer by placing on jack stands. Brew trustworthy the stands are certain standing on a Apartment lodgings surface. Apply concrete blocks to flush gone the ground whether needed.
2. Remove the shift linkage from the transmission of the Hummer. Remove the vacuum hoses on the transmission. Slide the U-joint from the rear of the Hummer, sliding it away of the transmission as proceeding to remove it.
3. There are 3 types, the H1, H2, and H3 Hummer. Sometimes, the transmission may exigency removing for either repair or replacement. Mechanics typically charge thousands of dollars to act transmission labour. Removing the transmission on the Hummer, repairing the hot water and then installing the transmission back Testament add up to a vast reward.
Detach the lower bell housing using the socket establish. Remove all torque converter bolts and ring housing bolts. Lay aside all bolts for use later on.
5. Remove the rear transmission mount bolts. Raise the transmission and jack up ½ an inch to remove the cross member. Pull down and lower the transmission slowly. Roll toward the back of the Hummer. Slide the transmission out from under the Hummer.
