The brake caliper is key to stopping your automobile. Lift the automobile up mechanically in a garage, where you can effort in a unharmed field.2. Accept the caliper off, remove the brake pads and then mount a compressor tool in the caliper.3.
It is the most cardinal portion of Accoutrement in the brake process. Friction from the brake caliper is what stops the circle from turning.
Instructions
1.Steer the awash socket of the compressor tool on the piston of the caliper. Slide the Apartment lodgings plate of the compressor tool into the caliper.
4. Screw the bolt of the compressor baggage into the socket to generate a snug fit.
5. Applicability a 9/16 inch ratchet to tighten the bolt. You Testament charge to use a serious amount of arm strength to crank the ratchet.
6. Support the caliper--remember it has only the brake line as its support at this point.
7. Watch for the point in the process where there is a 1/16 inch of the piston visible above the surface of the rotor. The caliper is now fully compressed.
