Remove the Inside Door Panel on the Chauffeur's Side of a 1999 Ford Windstar Car
Reinstall the door panel by reversing the removal procedure. You can re-seat the trim pins with a solid knock from the side of your fist on the portion of the door panel located directly opposite the trim pin. Removing the door panel should select no also than approximately 20 minutes, when armed with the licence tools and some mechanical inclination.
Instructions
1. Practice the socket establish to remove any visible fasteners in the door panel. In the fancier models, you may need to pop off trim covers to locate the fasteners hidden underneath. The trim panels can be removed by gently prying them out with the tip of a pocket screwdriver. Once all the fasteners are out, set them some place safe for easy access when you reinstall the door panel.
2. Slip the trim pin removal tool under the rear, bottom edge of the door panel and dislodge the trim pin found there. The pin sits in a socket and pulls out with one or two prying motions with the trim pin removal tool. You can purchase a trim pin removal tool at any tool retailer or your local auto parts store.
3. Work your way across the bottom of the door panel, unseating each trim pin that you encounter until they are all detached from the door.
4. Lift the door panel up and then away from the door far enough to reach behind and unclip the wiring harness from the power lock and power window switches. Once the harness is unclipped, set the door panel off to the side where it cannot be damaged or get dirty.
5.The Ford Windstar was Ford Engine Partnership's culminating selling minivan from 1995 to 2003. The Windstar was equipped with authority windows and door locks, which add an additional test to door panel Emigration. The door panel Testament commitment to be taken off in the reality the window regulator or window Engine goes dangerous, and it very needs to be removed to attainment access to the door knob mounts and door lock.
