Thursday, December 3, 2015

Troubleshooting 2000 Ford Taurus Ac

Troubleshoot the a/c action on your 2000 Ford Taurus before summer hits.


3. Start the vehicle and check the two hoses near the firewall under the hood. Touch the hoses to check the temperature.



Proof the dials on the a/c determination panel for resistence or damage. Assure that both the a/c and the blower fan are switched on. Provided you discharge not hear the electric blower fan running, it may desideratum to be replaced, or it could and be that a fuse has blown.


2. Glom unbefitting the steering trundle for the fuse panel and analysis for blown fuses. Spring from the schematic on the fuse panel subsume for directions on fix the a/c fuse. Convert the fuse with another of the same rating, if necessary.


Turning on your a/c in July and receiving a blast of fiery air in the face is no entertaining. Troubleshooting is normally quite intelligible, if the occupation be a blower fan that needs replacing or a blown fuse. Before captivating your 2000 Ford Taurus in for an expensive shop call, there are a infrequent basic steps you can flight ended.

Instructions

1. One should be a little cooler than the other. If both of them are hot, there could be a problem with the valve control. Have a qualified mechanic replace the valve control.


4. Check to see if there is enough pressure in the a/c system by connecting an a/c gauge with the engine turned off. The pressure should read between 50 PSI and 80 PSI.


5. Turn up the a/c and switch on the engine. Open the hood and wait for the a/c compressor clutch to engage. You will see and hear the compressor begin to turn. Add coolant to the system if the clutch does not engage. Check that the drive belt is secure. If the clutch still does not engage, have a mechanic check the compressor for leaks.