The GM alternator used in all Chevrolet models is little to install, as it is connected using particular a infrequent wires. The easiest way to do this is to associate the wire from the alternator to an existing line for a dashboard light. This will also create a circuit that will signal the light on your dashboard to denote a malfunctioning alternator.5.
1. Disconnect the vehivle's battery before inauguration any elbow grease to avoid the risk of electric shock while wiring your alternator.
2. Tighten the mounting bracket onto the alternator using bolts. Mount the bracket to the becoming stop on the engine block and secure in lay.
3. Wire the BAT terminal on the alternator directly to the positive terminal of the automobile's battery. Be undeniable to manipulate bulky shielded wire rated for applicability with a 12V DC method. For one-wire alternators, this Testament complete the electrical installation and you can skip to the last Step.
4. Wire the #1 terminal to a key-switched ignition line. The alternator converts the engine's mechanical rotations into an electrical contemporary using a pulley-and-belt course. This ongoing is fed to the machine's battery, charging it for successive operate. In newer models, the alternator is internally regulated and can be connected with individual one wire linked to the automobile's battery.
Instructions
Connect the #2 terminal to the positive terminal on the battery. This terminal can also be jumped directly to the BAT terminal. This line is used to regulate the power generated by the alternator.
6. Attach the alternator fan belt to the pulleys on the engine and alternator.
