A heat shield helps to prevent sizzling air existence sucked into your chill air intake. Be careful not to drill in to any wires or reservoirs. Insert screws through the L-bracket holes and tighten using bolts. The aluminum sheeting will act as a heat shield from the surrounding engine temperatures.
Instructions
1. Chop a plenty of aluminium sheeting that is up to five inches by five inches using Tinplate snips. Shorten the aluminium sheeting as needed To admit for it to fit enclosing the air filter properly.
2. Employment sandpaper to smooth the edges of the aluminium sheeting.
3. Divide a gap in the centre of the aluminium sheeting using Tinplate snips to the receive thickness of your bitter air intake tube. Bend the metal sheeting so that it forms an angle encircling the air filter.
4. Include the intake tube ended the heat shield and attach you air filter as normal. Drill two small mounting holes on the side or the top of the metal sheet that matches the mounting hole distance on the L-bracket To admit for the L-bracket to be screwed onto. Place the L-bracket onto the drill holes. Insert screws with bolts and tighten so that the L-bracket is secure to the metal shield. This allows for you to mount the bracket to an area near the fender well in the engine bay to help keep the air filter mounted away from the engine.
5. Install the intake system by connecting the straight piece of intake tube to the throttle body, connect the second piece of intake tube which contains the MAF, or Mass Air Flow sensor and connect the elbow intake tubing that connects the air filter down into the fender well. Drill two small mounting holes in the engine bay near the fender well of your vehicle to allow the L-bracket to be fastened to. A heat shield is a bantam Apartment lodgings plenty of aluminium that is placed near the filter and protects it from the heat the engine displaces while it is running. You can emend the performance of your cold air intake by increasing the brumal air delivered to your automobile. Adjust your own heat shield Homewards. This helps your cold air intake system absorb cold air only.
